Utils365

Online tone generator

Play an exact frequency or noise colour, to test speakers, your hearing or an instrument.

  • 100% free
  • No sign-up
  • Runs in your browser

Frequency

440 Hz

Nearest note A4 (+0 cents)

Quick picks

Most adults hear from about 20 Hz to 15,000–17,000 Hz; the top end drops with age. Speakers and headphones may not play the very lowest or highest tones at all.

Next: Online tuner · Decibel meter · Metronome

Report a problem with this tool

How to use Tone generator

  1. Set the frequency

    Drag the slider, which is logarithmic so every octave gets the same room, or type an exact value in hertz.

  2. Choose the sound

    Pick a waveform, or white, pink or brown noise. Turn on Sweep to glide from one frequency to another.

  3. Play, starting quietly

    Press Play with the volume low and turn it up slowly. Change the frequency while it plays to hear it move.

Why use Utils365

  • Precise frequencies

    Any value from 1 Hz to 20 kHz to two decimals, with octave and 1 Hz steps and the nearest musical note shown.

  • Four waveforms

    A pure sine, the hollow square, the buzzy sawtooth and the soft triangle, each balanced so the louder ones don’t jump out.

  • Three noise colours

    White, pink and brown noise, made in your browser, for testing speakers, masking sounds or helping you focus.

  • Smooth sweeps

    Glide from 20 Hz to 20 kHz over up to a minute, once or on repeat, to find rattles or the limit of your hearing.

Frequently asked questions

What frequencies can people hear?

Roughly 20 Hz to 20,000 Hz for young people. The top end falls with age: many adults stop hearing around 15,000–17,000 Hz, and 8,000 Hz can be hard to hear after 60.

What is a 440 Hz tone?

440 Hz is the note A above middle C (A4), the standard tuning pitch. Middle C is 261.63 Hz, and each octave up doubles the frequency, so A5 is 880 Hz.

What is the difference between white, pink and brown noise?

White noise has equal energy at every frequency and sounds hissy. Pink noise falls 3 dB per octave and sounds balanced, like rain. Brown noise falls 6 dB per octave and sounds deep, like a waterfall.

How do I test my speakers or subwoofer?

Play a sine sweep from 20 Hz to 200 Hz for a subwoofer, or 20 Hz to 20,000 Hz for full-range speakers. Listen for where the sound fades and for rattles or buzzing.

Can a tone generator damage my hearing or speakers?

Yes, if played loud. Start at a low volume, especially with headphones, and don’t play high tones loudly for long. Very low or very high frequencies at full volume can also strain small speakers.

What is a frequency sweep?

A tone that glides smoothly from one frequency to another. The sweep here is exponential, so it spends the same time on each octave, the way we hear pitch.

Why can’t I hear very low frequencies?

Below about 20 Hz sound is felt rather than heard, and phone and laptop speakers rarely play below 100–200 Hz. Use headphones or a subwoofer for bass tones.